References

references
January 2009 - 2-steps impregnation line width: 1900 mm.
November 2016 - Squaring line for click profile flooring tiles production.
May 2009 - Upgrade of 1-step impregnation unit.
September 2010 - 2-steps impregnation line width: 1300 mm.
March 2017 - 2-steps impregnation line width: 1300 mm.
November 2012 - Off-line cutter width: 1850 mm.
August 1998 - Complete plant for kitchen tops and doors.
January 2011 - Dosing system for liquid resins and solid components for liquid overlay application.
December 2017 - Full Flexible Special application coater width: 1300 mm.
December 2011 - Rewinder + n.2 coating units for liquid overlay width: 2650 mm.
February 2012 - Upgrade to direct gas heating system for existing impregnation line.
December 2012 - Upgrade to direct gas heating system for n.2 existing impregnation lines.
September 2013 - Top coater for kraft impregnation line upgrade.
July 2015 - Offline Unwinder / rewinder for rainbow rolls width 2250 mm.
February 2017 - 1-step HIGH SPEED impregnation line width: 1900 mm.
December 1999 - Heating plant 250.000 kcal.
April 2000 - Short cycle line size 4’x8’.
October 2000 - Reconditioning and upgrade on high-pressure system for HPL plant.
June 2002 - n.1 HPL presses size:1300x2800, 15 daylights.
February 2004 - Wemhoener short cycle line size 6’ x 12’.
August 2012 - Cutting machine 4' for impregnation line.
April 2018
  • Automatic short cycle pressing line 4'x9'
  • 2-steps impregnation line width: 1300 mm.
  • Steam boiler and thermal oil heater for lamination plant
  • Resin plant for mf and uf resins

November 2008 - 2-steps impregnation line width: 1300 mm.
May 2016 - Coating unit and accessories for liquid overlay application 6' width.
May 2004 - Full reconditioning of HPL Sanding/Squaring line.
April 2005 - 2-steps impregnation line VITS width 2200 mm.
May 2006 - Cutting machine 4' for impregnation line.
June 2007 - 2-steps impregnation line width: 1900 mm.
April 2008 - Rotative cutting machine 4' for impregnation line.
August 2008 - 2-steps system upgrade to existing impregnation line width: 1900 mm.
January 2009 - High speed cut for phenolic impregnation line.
December 2014 - Coating unit and accessories for liquid overlay application 4' width.
March 2015 - Upgrade of existing impregnation line with new cutting unit 4'.
August 2008 - Combined coating unit for melamine/finish foil.
May 2005 - 2-steps impregnation line width: 1900 mm.
March 2008 - Rewinding unit for kraft paper.
September 2015 - Complete refurbishing of HPL press with new platens 2870x1375 mm.
Under Delivery - HPL press line 24 openings 4'x8' with double bridge.
July 2006 - Wemhoener short cycle line size 2100 x 5600 mm.
July 2010 - 2-steps impregnation line width: 1300 mm.
December 2014 - Automatic pressing line for veneer application on particle board size 1900x8000 mm.
February 2018 - Semi automatic short cycle press 4'x8'.
February 2018 - Heating plant for thermal oil.
June 2001- Particle board Cut-to-size plant Teuromatic size.
July 2001 - Short cycle line Pagnoni size 1860 x 3750 mm.
June 2002 - Survey of dismantling and reconditioning PB plant Pagnoni capacity size.
December 2002 - Complete particle board plant
  • Size: 4250 - 3750 x 1860 mm.
  • Daylight: N°12
  • Capacity: 500-600 Mc /day
July 2004 - Drum chipper 1400x800 mm., 1000 kW.
August 2005 - 2-steps impregnation line width: 2240 mm.
March 2006 - Complete Melamine / urea resin plant capacity:2+2 m3.
March 2006 - Complete fenolic resin plant capacity: 6 m3.
March 2006 - 2-steps impregnation line width:1900 mm.
March 2006 - 1-step phenolic impregnation line width: 1500 mm.
November 2006 - Start up of CPL plant.
June 2008 - Short cycle press line 4' x 10'.
November 2010 - 2-steps impregnation line width: 1300 mm.
November 2014
  • n.2 short cycle presses 7x9 n.1 short cycle press 4x9
  • n.1 short cycle press 4x10
  • n.1 impregnation line width: 2350 mm.
October 2015 - HPL press single opening for hot-hot cycle.
January 2016 - 2-steps impregnation line width: 1900 mm.
January 2016 - n.2 Sanding machines for HPL w. 1600 mm.
June 2017 - n.1 Sanding machine for HPL w. 1900 mm.
November 2017 - n.1 squaring line for compact and standard HPL with automatic loading and unloading handling.
October 2000 - n.1 HPL press size: 1300 x 2800 mm 15 daylights.
October 2001 - Short cycle line size 4’x8’.
October 2001 - Formaldehide plant capacity.
November 2003 - 2-steps impregnation line width: 1400 mm.
October 2004 - 2-steps impregnation line width: 1400 mm.
June 2005 - Complete HPL plant Siempelkamp n.10 daylight size 2850 x 1350 mm and impregnation lines / squaring lines / auxiliary equipment.
September 2005 - 2-steps impregnation line width: 1400 mm.
May 2006 - 2-steps impregnation line width: 1400 mm.
July 2009 - 2-steps impregnation line width: 1300 mm.
September 2009 - 2-steps impregnation line width: 1300 mm.
April 2011 - 2-steps impregnation line width: 1300 mm.
February 2018- 2-steps HIGH SPEED impregnation line width: 1300 mm.
December 2007 - Short cycle pressing line 4'x8'.
May 2008 - 2-steps impregnation line width: 2100 mm.
May 2014 - n.2 short cycle presses 6x9 // n.2 short cycle presses 4x8.
May 2014 - Heating plant and dust collection system.
January 2013 - Complete factory for HPL manufacture including:
  • n.1 24 opening HPL press
  • n.1 14 opening HPL press
  • Superheated water system with heat recovery
  • Steam and thermal oil heating plants
  • System for treatment of phenolic fumes
  • resin plant for MF and PF resin
  • n.3 1-step impregnation lines
  • n.1 squaring and sending line for HPL
  • n.1 squaring line for compact HPL
  • complete laboratory equipment.

October 2015 - Cutting and stacking unit for impregnation line width 6'.
August 2004 - Complete HPL plant including:
  • Press Pagnoni 12 openings, size 130 x 280 cm.
  • Complete squaring line impregnation line heating plant + accumulator.
May 2005 - 2nd hand Complete melamine resin plant.
June 2005 - New Complete phenol plant (max capacity 10 m3).
June 2005 - New 1-step phenolic impregnation line width 4’.
July 2005 - n.1 2nd hand HPL presses Pagnoni.
September 2005 - 2nd hand 2-steps impregnation line width 4’.
July 2006 - Squaring line.
April 2017 - Complete factory for HPL manufacture including:
  • n.1 24 opening HPL press 2000 x 3050 mm
  • Superheated water system with heat recovery
  • n.1 1-step impregnation line
  • n.1 2-step impregnation line
  • n.1 squaring line for compact HPL
  • n.1 line for quality selection.

January 2004 - Feasibility study. Particle board plant size m2.
May 2016 - Coating unit and accessories for liquid overlay application 6' width.
July 2018 - Full flexible Special application coater width: 2000 mm.
July 2015 - 2-steps impregnation line width: 1300 mm.
March 2018 - 2-steps impregnation line width: 1300 mm.
March 2013 - Upgrade of existing impregnation line with new cutting unit 4'.
October 2003 - 2-steps impregnation line Vits width 1900 mm. equipped for finish foil.
October 2003 - 2-steps impregnation line Vits width 1300 mm. equipped for finish foil and edge banding.
April 2004 - n.2 2-steps impregnation lines Vits / Tocchio width 2300 mm equipped for finish foil and melamine impregnation.
April 2004 - n.1 resin kitchen IMAL for lacquer and additives.
June 2006 - HPL sanding/squaring line CREMONA Max. width: 1850 mm.
March 2008 - 1-step impregnation line width: 1600 mm.
May 2011 - 1-step impregnation line width: 1600 mm.
July 2012 - 1-step impregnation line width: 1600 mm.
November 2012 - Upgrade of existing impregnation line with n.7 high efficiency ovens.
July 2013 - Wemhoener short cycle line size 2300 x 5600 mm.
June 2015 - 2-steps impregnation line width: 1900 mm.
September 2015 - Complete refurbishing of HPL press with new platens and heating distribution system 4300x1650 mm.
November 2015 - 2-steps impregnation line width: 1800 mm.
June 2016 - Relocation of high capacity Teutomatic cut to size raw boards.
Under delivery - Full flexible Special application coater width: 1800 mm.
November 2007 - Rotative cutting machine width: 1780 mm.